Gates

: 3.3m Gate in Frame
Purpose: Entry yard gate Frame: 2.4m high x 3.3m wide (50 x 50 x 1.6mm) Gate: 1.5m high x 3m wide (50 x 50 x 1.6mm x 6 rails) Split frame for transport. Australian made high tensile, 450 grade galvanised SHS

: 2.4m Gate in Frame
Purpose: Intermediate yard gate Frame: 2.4m high x 2.4m wide (50 x 50 x 1.6mm) Gate: 1.5m high x 2.15m wide (40 x 40 x 1.6mm x 6 rails) Split frame for transport. Australian made high tensile, 450 grade galvanised SHS

: Low 2.4m Gate in Frame
Purpose: Intermediate yard gate (low volume use) Frame: 2m high x 2.4m wide (40 x 40 x 1.6mm) Gate: 1.5m high x 2.15m wide (40 x 40 x 1.6mm x 6 rails) Australian made high tensile, 450 grade galvanised SHS

: Double Gate in Frame
Purpose: Entry gate Frame: 2.4m high x 4.6m wide (65 x 65 x 3mm) Gates: 1.8m high x 2.15m wide x 2 off (40 x 40 x 1.6mm) Australian made high tensile, 450 grade galvanised SHS

: Manway Gate in Panel
Purpose: Personnel access gate with the same dimensions as a standard panel. Overall height: 2.4m Panel height: 1.8m Gate height: 1.8m Overall width: 2.2m Gate width: 0.6m 40 x 40 x 1.6mm x 6 rails Australian made high tensile, 450 grade galvanised SHS

: Slide Gate
Purpose: Controls movement in race Nylon rollers, 50 x 50 x 1.6mm rails Australian made high tensile, 450 grade galvanised SHS Options: 700 or 770 wide clear inside width.

: Manway Gate
Purpose: Personnel access gate Frame: 2.4m high x 0.75m wide Gate: 1.8m high x 0.6m wide (40 x 40 x 1.6mm x 6 rails) Australian made high tensile, 450 grade galvanised SHS

: 1.4m Draft Gate
Purpose: Portable draft gate Frame: 2m high x 1.4m long (50 x 50 x 1.6mm) Gate: 1.3m clear inside width x 6 rails (40 x 40 x 1.6mm) Australian made high tensile, 450 grade galvanised SHS Left or right handed – reversible Shuts up against the frame – chain latch

: 2.4m Draft Gate
Purpose: Portable / permanent, large drafting gate 2m high x 2.5m long Gate: 2.3m clear inside width x 6 rails (50 x 50 x 1.6mm) Australian made high tensile, 450 grade galvanised SHS Gate can be configured into left or right handed Shuts up against the frame – chain latch

: 2.5m Draft Gate in Panel
Purpose: Portable / permanent, increases pound area with smaller drafting gate 2m high x 2.5m long Gate: 1.5m clear inside width x 6 rails (50 x 50 x 1.6mm) Australian made high tensile, 450 grade galvanised SHS Gate can be configured into left or right handed Shuts up against the frame – chain latch

: Draft gate with Platform
Purpose: The use of platform and gate arms will increase safety for employees when working yards, as they are not in with cattle and decrease time and labour required in working high volumes of cattle. Outside Frame: 50x50x1.6mm Gate: 50 x 50 x 1.6mm Australian made high tensile, galvanised SHS

: Race Bow
Purpose: Stop race from spreading 2.4m high x 0.7m clear inside width (50 x 50 x 1.6mm) Australian made high tensile, 450 grade galvanised SHS

: Spear Trap
Purpose: One way entry gate for trapping cattle Frame: 1.95m high x 0.92m wide (75 x 75 x 1.6mm) 6 x rubber coated spear arms (40 x 40 x 1.6mm) 0.32m long on 45º angle Australian made high tensile, 450 grade galvanised SHS

: Bolt on Hinge
Allows for left & right hand Hinges reinforced with plate to prevent tearing Strong & durable, easy for replacement

Gate in Frame Features

: Joining System
Chain Latch – firm lock with quick and easy release.

: Locking System
This crimped S.H.S creates a firm join by simply sliding together. Purpose: Split for transport.