« View all Deweld Services

Ramps

Ramp Floor - 3mm galvanised plate with 250mm corrugationsDeweld Cattle Equipment can help with most loading ramp requirements. Our base ramp is just 3m long and fits perfectly in most utes. The Deweld modular double decker ramp tops the range, being suitable for high volume usage in cattle yards or feed lots. Ramp floors are made from 3mm galvanised plate steel with corrugations every 250mm.

3m Loading Ramp

3m Loading Ramp

3m Loading Ramp

Purpose: For yards holding/working less than 100 head. The benefit of this ramp is that it is easily moved from yard to yard as it fits in the back of a one tonne ute (collapsible design only).

Specification: 350 & 450 grade galvanised SHS.

  • Large A frame: 50x50x1.6mm
  • Small A frame: 40x40x1.6mm
  • Rails: 40x40x1.6mm
  • Floor: 3mm galvanised plate
  • (with corrugation every 250mm)

Construction Options: collapsible, permanent or collapsible/adjustable.

4.3m Loading Ramp

4.3m Loading Ramp

4.3m Loading Ramp

Purpose: For yards holding/working less than 400 head. This ramp has a 15 degree incline over 4.6m making it easy to load and unload cattle.

Specification: 350 & 450 grade galvanised SHS

  • Large A frame: 65x65x3mm
  • Small A frame: 50x50x1.6mm
  • Rails: 50x50x1.6mm
  • Floor: 3mm galvanised plate (with corrugation every 250mm)

Construction Options: collapsible or permanent.

4.3m Loading Ramp with Side Load

4.3m Loading Ramp with Side Load

4.3m Loading Ramp with Side Load

Purpose: For yards holding / working less than 600 head. This ramp is designed for loading cattle onto cattle crates with slide load doors. It also has a 15 degree incline over 4.6m making it easy to load & unload cattle.

Specification: 350 & 450 grade galvanised SHS

  • Large A frame 65 x 65 x 3mm
  • Small A frame 50 x 50 x 1.6mm
  • Rails 50 x 50 x 1.6mm
  • Floor: 3mm galvanised plate (with corrugation every 250mm)
  • Side load platform: slide gate & door wings.

Construction options: Collapsible or permanent.

4.3m Loading Ramp with Side Load & Walkway

4.3m Loading Ramp with Side Load & Walkway

4.3m Loading Ramp with Side Load & Walkway

Purpose: For yards holding / working less than 600 head. This ramp is designed for loading cattle onto cattle crates with slide load doors. It also has a 15 degree incline over 4.6m making it easy to load & unload cattle.

Specification: 350 & 450 grade galvanised SHS

  • Large A frame 65 x 65 x 3mm
  • Small A frame 50 x 50 x 1.6mm
  • Rails 50 x 50 x 1.6mm
  • Floor: 3mm galvanised plate (with corrugation every 250mm)
  • Side load platform: slide gate & door wings. Non-slip walkway with handrail

Construction options: Collapsible or permanent.

4.3m Permanent Heavy Duty Loading Ramp with Side Load

4.3m Permanent Heavy Duty Loading Ramp with Side Load

4.3m Permanent Heavy Duty Loading Ramp with Side Load

Purpose: Heavy duty ramp built for high volume use. This ramp is designed for loading cattle into cattle crates with side load doors. It also has a 15 degree incline over 4.6m making it easy to load & unload cattle. This ramp has a fully welded construction and a rubber coated floor to decrease noise.

Specification: Australian made high tensile, 450 grade galvanised SHS

  • Large A frame: 65 x 65 x 3mm
  • Small A frame: 50 x 50 x 1.6mm
  • Rails: 50 x 50 x 1.6mm with 1.6 GAL sheeting
  • Ramp Support Runners: 150 x 50 x 4mm
  • Floor: 3mm galvanised plate
  • (with corrugation every 250mm)
  • Side load platform: slide gate & door wings
  • Non-slip walkway with handrail

Construction options: Permanent.

Modular Double Deck Ramp

Save time and money with quick handling, less labour and bruisingWe have designed and engineer approved a Modular Double Deck Ramp suitable for high volume usage in feed lots or cattle yards. This modular ramp is built in five section at Deweld and bolted together within two hours on site.

Investment in one of these ramps has many benefits:

  • Saves time and money with quick handling and less labour and bruising
  • Saleable asset
  • Handle various size beasts
  • Modular Double Deck RampQuick to install
  • Designed for high volume use

Standard features include

  • Fully sheeted with GAL
  • 700 or 770mm wide race
  • Side load platform
  • 1.8m level run before ramp decline
  • 350 & 450 grade galvanised SHS
  • Floor 3mm galvanised plate pressed into corrugations every 250mm, rubber coated
  • Meets workplace health and safety requirements
  • Has a 50mm cleaning gap between floor and side sheeting
  • 14m long x 2.7m wide
  • Top deck loading platform lifts up
  • Ladder to top deck for quick access
Bolt together on site within 2 hours

Bolt together on site within 2 hours

Design options

Design options
Position of the lower race (left or right handed). Other slight variations to the design can be made to suit the user.

3m Mobile Ramp

3m Mobile Ramp – towing position

3m Mobile Ramp

Purpose: For unloading and loading cattle in a small temporary yard and for moving sick or injured beast. Property use only.

Specification:
Single axle
Tilting A-frame
Un-registered

Various options in the trailer ramp are available.

4.3m Trailer Ramp

Purpose: This mobile ramp can carry up to 20 panels to erect a temporary yard for loading and unloading cattle. Plus it can double as a float for moving animal.

Elevated Working Position

Elevated Working Position

Specification (Registered):

  • Electric brakes
  • 2 Tonne trailer
  • Tandem trailer
  • Tilting A-frame (one man operation)
  • Includes jockey wheel
  • Can carry up to 20 panels
  • 4.3m ramp
  • 2 x slide gates

Specification (Unregistered):

  • Tandem trailer
  • Tilting A-frame
  • 4.3m ramp
  • No brakes (property use only)
  • Includes jockey wheel
  • Can carry up to 20 panels
  • 2 x slide gates